Abstract
During FY2018 the Oak Ridge National Laboratory (ORNL) Radioisotope Power Systems (RPS) Program completed re-establishment of capability to produce platinum-30% rhodium (Pt-30Rh) alloy components for the Light Weight Radioisotope Heater Unit (LWRHU) Program. These components were last produced at Mound Laboratory in the mid/late-1990s for the National Aeronautics and Space Administration (NASA) Cassini mission. The LWRHU Pt-30Rh Clad Body Subassembly and component fabrication operations are being performed in the iridium alloy Clad Vent Set (CVS) production area at ORNL. Existing equipment (furnaces, electron beam welders, presses, inspection, etc.) are being utilized along with new equipment (two lathes and laser marker) that were purchased for this work. ORNL purchased and qualified an initial quantity of starting materials (Pt powder, Pt-30Rh foil, sheet, and tubing). Equipment, tooling, and materials were procured/fabricated and qualified. Drawings and specifications were updated/modified/developed to the ORNL RPS Program format. Procedures were developed and qualified. All drawings, specifications, and procedures were reviewed/approved by the Idaho National Laboratory (INL) RPS Lead Lab Document Configuration Control Board (DCCB). The dimensional inspection operations and special processes (cleaning, heat treating, sintering, dye penetrant inspection, leak testing, and welding) were successfully qualified and documented. This paper will discuss the process of re-establishing LWRHU production at ORNL to provide for future NASA space exploration science mission needs10.
