Abstract
In order to investigate the effects of ultrasonic vibration on degassing of aluminum alloys, three experimental systems have been designed and built: one for ultrasonic degassing in open air, one for ultrasonic degassing under reduced pressure, and one for ultrasonic degassing with a purging gas. Experiments were first carried out in air to test degassing using ultrasonic vibration alone. The limitations with ultrasonic degassing were outlined. Further experiments were then performed under reduced pressures and in combination with purging argon gas. Experimental results suggest that ultrasonic vibration alone is efficient for degassing a small volume of melt. Ultrasonic vibration can be used for assisting vacuum degassing, making vacuum degassing much faster than that without using ultrasonic vibration. Ultrasonically assisted argon degassing is the fastest method for degassing among the three methods tested in this research. More importantly, dross formation during ultrasonically assisted argon degassing is much less than that during argon degassing. The mechanisms of ultrasonic degassing are discussed.