Skip to main content
SHARE
Publication

Initial results from boron powder injection experiments in WEST lower single null L-mode plasmas

Publication Type
Journal
Journal Name
Nuclear Fusion
Publication Date
Page Number
086020
Volume
62
Issue
8

Using a recently installed impurity powder dropper (IPD), boron powder (<150 μm) was injected into lower single null (LSN) L-mode discharges in WEST. IPDs possibly enable real-time wall conditioning of the plasma-facing components and may help to facilitate H-mode access in the full-tungsten environment of WEST. The discharges in this experiment featured Ip = 0.5 MA, BT = 3.7 T, q95 = 4.3, tpulse = 12–30 s, ne,0 ∼ 4 × 1019 m−2, and PLHCD ∼ 4.5 MW. Estimates of the deuterium and impurity particle fluxes, derived from a combination of visible spectroscopy measurements and their corresponding S/XB coefficients, showed decreases of ∼50% in O+, N+, and C+ populations during powder injection and a moderate reduction of these low-Z impurities (∼50%) and W (∼10%) in the discharges that followed powder injection. Along with the improved wall conditions, WEST discharges with B powder injection observed improved confinement, as the stored energy WMHD, neutron rate, and electron temperature Te increased significantly (10%–25% for WMHD and 60%–200% for the neutron rate) at constant input power. These increases in confinement scale up with the powder drop rate and are likely due to the suppression of ion temperature gradient (ITG) turbulence from changes in Zeff and/or modifications to the electron density profile.