Abstract
Supported liquid membranes (SLMs) based on ionic liquids (ILs) with not only high gas permeability and selectivity, but also high stability under high pressure, are highly desired for gas separation applications. In this work, permeable and selective polyamide network (PN) layers are deposited on the surface of SLMs by utilizing the cross‐linking reaction of trimesoyl chloride, which was pre‐dispersed in the SLMs, and vapor of amine linkers. The vapor cross‐linking method makes it easy to control the growth and aggregation of PN layers, owing to the significantly reduced reaction rate, and thereby ensuring the good distribution of PN layers on the surface of SLMs. With rational choice of amine linkers and optimization of vapor cross‐linking conditions, the prepared sandwich‐like PN@SLMs with ILs embedded homogeneously within polymeric matrices displayed much‐improved CO2 permeability and CO2/N2 selectivity in relation to the pristine SLMs. Moreover, those SLMs with ILs impregnated into porous supports physically displayed improved stability under high pressure after vapor cross‐linking, because the PN layers formed on the surface of SLMs help prevent the ILs from being squeezed out. This interfacial engineering strategy represents a significant advance in the surface modification of SLMs to endow them with promising applications in CO2 capture.
