Abstract
In this work, we examine the swelling of nanostructured block copolymer electrolytes immersed in liquid water. A series of sulfonated polystyrene-b-polyethylene-b-polystyrene (S-SES) membranes having the same nominal chemical composition but two different morphologies are prepared by systematic changes in processing. We start with a membrane comprising a mixture of homopolymer polystyrene (hPS) and a polystyrene-b-polyethylene-b-polystyrene (SES) copolymer. hPS is subsequently selectively removed from the membrane and the polystyrene domains are sulfonated to give S-SES membranes. The morphology of the membranes is controlled by controlling ϕv, the volume fraction of hPS in the blended membrane. The morphology of the membranes was studied by small angle X-ray scattering (SAXS), cryogenic scanning transmission electron microscopy (cryo-STEM), and cryogenic electron tomography. The overall domain swelling measured by SAXS decreases slightly at ϕv = 0.29; a crossover from lamellar to bicontinuous morphology is obtained at the same value of ϕv. The bicontinuous morphologies absorb more water than the lamellar morphologies. By contrast, the nanodomain swelling of the bicontinuous membrane (120%) is slightly less than that of the lamellar membrane (150%). Quantitative analysis of the STEM images and electron tomography was used to determine the swelling on the hydrophilic and hydrophobic domains due to exposure to water. The hydrophilic sulfonated polystyrene-rich domain spacing increases while the hydrophobic polyethylene domain spacing decreases when the membranes are hydrated. The extent of increase and decrease is not a strong function of ϕv.
