Bruce A Pint Interim Section Head, Materials in Extremes Contact pintba@ornl.gov | 865.576.2897 All Publications Effect of Impurities on the Compatibility of Steels in Supercritical CO2 at 450°–650°C Liquid metal compatibility of pre-oxidized FeCrAl in flowing Sn Finite Element Modeling of the Phase Change in Thermally-Grown SiO2 in SiC Systems for Gas Turbines... Characterization of Oxide Scales Formed on Fe-20Cr-(20-25)Ni Alloys in Supercritical CO2 Rapid Quenching of Molten Salts as an Approach for the Coordination Characterization of Corrosion Products Coated and Uncoated Steel Compatibility in Supercritical CO2 at 450°-650°C OVERVIEW OF RECENT COMPATIBILITY ASSESSMENTS IN FLOWING EXPERIMENTS: Sn, Li, Pb-Li AND MOLTEN SALTS ULTIMATE FY23 Vacuum Creep Testing Facility Operation Report The Impact of Oxidation-Induced Degradation On Materials Used in Hydrogen-Fired Microturbines THE IMPACT OF OXIDATION-INDUCED DEGRADATION ON MATERIALS USED IN HYDROGEN-FIRED MICROTURBINES Measuring the Dissolution of Cr and Fe at 550°-750°C in FLiNaK and FLiBe The Dissolution of Cr and Fe at 850°C in FLiNaK and FLiBe Methodology for Assessing Stainless Steel Compatibility in Fluoride Salts at 550°-850°C Long term oxidation of NiCoCrAlY coated Ni-based superalloys: A comparison of observed and simulated interdiffusion... Environmental barrier coatings on enhanced roughness SiC: Effect of plasma spraying conditions on properties and performance Oxidation Behavior of Heat-Resistant Type HK Steel (HK30Nb) at 800 °C... The Effect of Higher Water Vapor Content in H2-Fired Turbines on High Temperature Durability Predicting the creep-rupture lifetime of a cast austenitic stainless steel using Larson-Miller and Wilshire parametric approa... Internal carburization and scale formation on austenitic steels in supercritical carbon dioxide Effect of Impurities on the Compatibility of Steels in Supercritical CO2 at 450°-650°C ULTIMATE FY22 Creep Test Facility Report Characterization of Fe and Cr Dissolution and Reaction Product Formation in Molten Chloride Salts With and Without Impurities Compatibility of Wrought Superalloys with Supercritical CO2 Raman spectroscopic characterization of SiO2 phase transformation and Si substrate stress relevant to EBC performance... Evaluation of the interaction between SiC, pre-oxidized FeCrAlMo with aluminized and pre-oxidized Fe-8Cr-2W in flowing PbLi Pagination Current page 1 Page 2 Page 3 … Next page ›› Last page Last » Key Links Curriculum Vitae ORCID Organizations Physical Sciences Directorate Materials Science and Technology Division Materials in Extremes Section Corrosion Science and Technology Group