Jeremy T Busby Associate Laboratory Director, Isotope Science and Engineering Directorate Contact 865.241.6884 | busbyjt@ornl.gov All Publications Post-irradiation examination of commercial tantalum alloys following neutron irradiation Varied enhancements in mechanical properties and sodium compatibility of Grade 92 by thermomechanical treatments Technical Gap Assessment for Materials and Component Integrity Issues for Molten Salt Reactors Integrated Modeling of Second Phase Precipitation in Cold-Worked 316 Stainless Steels under Irradiation... Characterization of alloy 718 processed at different experimental conditions... Structure and Mechanical Properties of Improved Cast Stainless Steels for Nuclear Applications Characterization of Materials Properties and Crack Propagation Mechanisms in Damaged Alloy 718 Leaf Springs Following Commerc... Roles of Vacancy/Interstitial Diffusion and Segregation in the Microchemistry at Grain Boundaries of Irradiated Fe-Cr-Ni alloys Thermal Aging Phenomena in Cast Duplex Stainless Steels... Microstructural Evolution of Type 304 and 316 Stainless Steels under Neutron Irradiation at LWR Relevant Conditions Analysis of Stress Corrosion Cracking in Alloy 718 Following Commercial Reactor Exposure Formulating the strength factor alpha for improved predictability of radiation hardening... Stability of precipitate phases in Fe-rich Fe-Cr-Ni-Mo alloys Defect Sink Characteristics of Specific Grain Boundary Types in 304 Stainless Steels Under High Dose Neutron Environments... Radiation Damage In Reactor Cavity Concrete DEFORMATION LOCALIZATION AND DISLOCATION CHANNEL DYNAMICS IN NEUTRON IRRADIATED AUSTENITIC STAINLESS STEELS Effect of thermal aging on precipitation kinetics of gamma prime in alloy 617... Microstructural Characterization of Deformation Localization at Small Strains in a Neutron Irradiated 304 Stainless Steel ROLE OF SCALE FACTOR DURING TENSILE TESTING OF SMALL SPECIMENS... Magnetic phase formation in irradiated austenitic alloys DEFORMATION LOCALIZATION IN HIGHLY IRRADIATED AUSTENITIC STAINLESS STEELS... Thermodynamic modeling and Kinetics Simulation of Precipitate Phases in AISI 316 Stainless Steels... PHASE STABILITY OF HIGHLY IRRADIATED AUSTENITIC ALLOYS DURING DEFORMATION... Strain-induced phase transformation at the surface of an AISI-304 stainless steel irradiated to 4.4 dpa and deformed at 0.8% ... Twinning and martensitic transformations in nickel-enriched 304 austenitic steel during tensile and indentation deformations Pagination Current page 1 Page 2 Page 3 Next page ›› Last page Last » Key Links Curriculum Vitae ORCID Busby named associate lab director of ISED Organizations Isotope Science and Engineering Directorate Fusion and Fission Energy and Science Directorate Nuclear Energy and Fuel Cycle Division Physical Sciences Directorate