Thomas R Muth Research Staff and Team Lead, Metals and Refractories Group Contact muthtr@ornl.gov | 865.574.5264 All Publications High Temperature Tensile Testing of Molybdenum Before and After Exposure in Flowing He at 600°C to 1000°C Dual-Purpose Canister Filling Demonstration Project Progress Report at ORNL, 2023 Infrared thermometry in high temperature materials processing: influence of liquid water and steam... Second Target Station Project: LANSCE WNR Target 2 (Blue Room) Experiment 2022 Hot Deformation Behavior of an Industrially Cast Large Grained Low Density Austenitic Steel... Microstructure Evolution of Low Carbon Steel via Flash Processing A Novel Waveguide Concept for Ultrasonic Thermometry Applications... Fundamental Science and Technology of Flash Processing Robustness for Advanced High Strength Steels (AHSS)... AN ADVANCED ULTRASONIC WAVEGUIDE CONCEPT FOR SPATIALLY DISTRIBUTED MONITORING OF IN-CORE TEMPERATURES... Microstructure Control and Correlation to Formability of Low Alloy Steel Via Flash Processing... Hybrid metal composites fabricated by combining additive manufacturing and casting... Damage-tolerant metal-metal composites via melt infiltration of additively manufactured preforms... Damage-tolerant metallic composites via melt infiltration of additively manufactured preforms Causal Factors of Weld Porosity in Gas Tungsten Arc Welding of Powder Metallurgy Produced Titanium Alloys ... Current Status of Ti PM: Progress, Opportunities and Challenges... The investigation of die-pressing and sintering behavior of ITP CP-Ti and Ti-6Al-4V powders ... Titanium Sheet Fabricated from Powder for Industrial Applications... Mesoscale Modeling and Validation of Texture Evolution during Asymmetric Rooling and Static Recrystallization of Magnesium Al... The effect of rare earth elements on the texture and formability of asymmetrically rolled magnesium sheet... Key Links ORCID Organizations Physical Sciences Directorate Materials Science and Technology Division Materials Structure and Processing Science Section Metals and Composites Processing Group
