Tyler C Smith Technical Professional Contact smithtc@ornl.gov | 973.294.2482 All Publications RECYCLING CARBON FIBER FILLED ACRYLONITRILE-BUTADIENE-STYRENE FOR LARGE FORMAT ADDITIVE MANUFACTURING... Characterizing material transitions in large-scale Additive Manufacturing... High-Performance Molded Composites Using Additively Manufactured Preforms with Controlled Fiber and Pore Morphology... The Influence of Processing Parameters on the Transition Zone for Blended Material 3D Printing... Dual Material System for Polymer Large Scale Additive Manufacturing... Geometric Parameter Analysis of Vertically Extruded Pins for Strength Improvement in Additive Manufacturing with Fiber-Reinfo... Replacing Metal-Based Lightning Strike Protection Layer of CFRPS by 3D Printed Electrically Conductive Polymer Layer... CHARACTERIZING THE INFLUENCE OF PRINT PARAMETERS ON POROSITY AND RESULTING DENSITY... Development of Functionally Graded Material Capabilities in Large-scale Extrusion Deposition Additive Manufacturing... 3D PRINTED LAYER OF POLYANILINE-BASED CONDUCTIVE POLYMER FOR LIGHTNING STRIKE PROTECTION OF CFRPS... Replacing Metal-Based Lightning Strike Protection Layer of CFRPS by 3D Printed Electronically Conductive Polymer Layer... Z-Pinning approach for 3D printing mechanically isotropic materials... Structural Health Monitoring of 3d Printed Structures Z-Pinning Approach for Reducing Mechanical Anisotropy of 3D Printed Parts Graded Infill Structure of Wind Turbine Blade Accounting for Internal Stress in Big Area Additive Manufacturing... Parametric Analysis on Vertical Pins for Strengthening Extrusion-Based Printed Parts Pagination First page « First Previous page ‹‹ Page 1 Current page 2 Organizations Energy Science and Technology Directorate Manufacturing Science Division Composite Science and Technology Section Composites Innovation Group User Facilities Manufacturing Demonstration Facility