Tyler C Smith Technical Professional Contact smithtc@ornl.gov | 973.294.2482 All Publications Additive Manufacturing of Dissolvable Mandrels Recycling of CF-ABS machining waste for large format additive manufacturing EVALUATION OF DISSOLVABLE ADDITIVELY MANUFACTURED MOLDS AND SUPPORTS FOR ELECTROIMPACTS INNOVATIVE ADDITIVE MANUFACTURING PROCESS Additively manufactured polymer composites for heat exchanger applications: evaluation of critical thermophysical properties Modeling the interfacial failure and resulting mechanical properties of z-pinned additively manufactured composites... Compression and energy absorption characteristics of short fiber-reinforced 2D composite lattices made by material extrusion Recycling polymer composite granulate/regrind using big area additive manufacturing... Recyclability of additively manufactured bio-based composites THE IMPACT OF VISCOSITY ON MATERIAL TRANSITIONS IN LARGE FORMAT ADDITIVE MANUFACTURING OF POLYMER COMPOSITES Additive Manufacturing Design Guidelines for Wind Industry High Pressure and Two-Sided Mold Surface Solutions EVALUATING THE MECHANICAL PROPERTIES WITHIN THE TRANSITION REGION OF MULTI-MATERIAL LARGE-FORMAT EXTRUSION ADDITIVE MANUFACTU... Relevant Additive Manufacturing Materials for Wind Industry LARGE SCALE POLYMER ADDITIVE MANUFACTURING OF LIGHTWEIGHT FOAM STRUCTURES... Analysis of Fiber Attrition and Mechanical Performance in Large-Format Additive Manufacturing of Long-Fiber Reinforced Polymer Composites Printed Strain Gauges for Anthropomorphic Test Dummies for Vehicle Crash Testing... The impact of infill percentage and layer height in small-scale material extrusion on porosity and tensile properties... A Computational Fluid Dynamic Study on Polymer Heat Exchangers... Material Compatibility of 3D Printed Polymer Composites with Low GWP Refrigerants... THE IMPACT OF A STATIC-MIXING NOZZLE ON UNIFORMITY IN MATERIAL EXTRUSION LARGE-SCALE ADDITIVE MANUFACTURING... Surface-Driven Evolution of the Anomalous Hall Effect in Magnetic Topological Insulator MnBi2Te4 Thin Films... Joining technique for in-oven/autoclave molds manufactured by large scale polymer additive manufacturing... Characterizing The Internal Morphology of Transition Regions in Large-Scale Extrusion Deposition Additive Manufacturing... Evaluating the Effect of Z-pinning Parameters on the Mechanical Strength and Toughness of Printed Polymer Composite Structure... RECYCLING CARBON FIBER FILLED ACRYLONITRILE-BUTADIENE-STYRENE FOR LARGE FORMAT ADDITIVE MANUFACTURING... Pagination Current page 1 Page 2 Next page ›› Last page Last » Organizations Energy Science and Technology Directorate Manufacturing Science Division Composite Science and Technology Section Composites Innovation Group User Facilities Manufacturing Demonstration Facility