DONALD L Erdman III Contact erdmandl@ornl.gov | 865.576.4069 All Publications On the correlation between the stress exponent for creep determined by nanoindentation and the mechanism of action enabling s... Cooperative Research and Development Agreement Final Report Printed Strain Gauges for Anthropomorphic Test Dummies for Vehicle Crash Testing... The Fracture Toughness of Nuclear Graphite Grades... Fabric properties and electric efficiency limits of mechanical moisture extraction from fabrics... Tensile Properties of 3D-Printed Wood-Filled PLA Materials Using Poplar Trees A Pulse-Controlled Modified Burst Test Instrument for Accident-Tolerant Fuel Cladding ... The Mechanical Response of Advanced Claddings during Proposed Reactivity Initiated Accident Conditions... The Shear Fracture Toughness, KIIc, of Graphite ... A LASER INTERFERENCE-BASED SURFACE TREATMENT OF AL AND CARBON FIBER POLYMER COMPOSITES FOR ENHANCED BONDING... Structure and Mechanical Behavior of Big Area Additive Manufacturing (BAAM) Materials ... Crashworthiness characteristics of a carbon fiber reinforced dual-phase epoxy-polyurea hybrid matrix composite... THE EFFECT OF STEAM ON THE ELEVATED TEMPERATURE HIGH CYCLE FATIGUE LIFE OF HAYNES 282® SUPERALLOY... IR Heat Treatment of Hybrid Steel-Al Joints... Constrained thermal fatigue performance of several cast ferrous alloys... Effect of Creep and Oxidation on Reduced Creep-Fatigue life of Ni-based Alloy 617 at 850 ºC... Low cycle fatigue and creep-fatigue behavior of Ni-based alloy 230 at 850 °C... Experimental and modeling results of creep–fatigue life of Inconel 617 and Haynes 230 at 850 °C... Characterization of High Strain Rate Mechanical behavior of AZ31 magnesium alloy using 3D Digital Image Correlation... High-Temperature Galling Characteristics of Ti-6Al-4V with and without Surface Treatments... Material Properties for the Simulation of Cold Pressing of Armstrong CP-Ti Powders... Strain Rate Effects on the Energy Absorption of Rapidly Manufactured Composite Tubes... Observation of Composite Materials Using Coupled Mechanical Testing and Computed Tomography... NRSF2 Load Frame: Design, Control, and Testing... Key Links ORCID Organizations Physical Sciences Directorate Materials Science and Technology Division Materials in Extremes Section Mechanical Properties and Mechanics Group