Jim R Keiser Distinguished Research and Development Staff Contact keiserjr@ornl.gov | 865.574.4453 All Publications Effect of Impurities on the Compatibility of Steels in Supercritical CO2 at 450°–650°C Rapid Quenching of Molten Salts as an Approach for the Coordination Characterization of Corrosion Products Coated and Uncoated Steel Compatibility in Supercritical CO2 at 450°-650°C Report on Initial Tribological Studies of Graphite in Dry Argon and Molten Salt Environment... Graphite-Salt Interactions: Summary of FY23 Activities Contact pressure analysis to allow improved design for the clearing plate in a biomass comminution system A neutron tomography study to visualize fluoride salt (FLiNaK) intrusion in nuclear-grade graphite Corrosion characteristics of monolithic SiC materials in beryllium-bearing molten fluoride salt Evaluation of Corrosion Behavior of Various Fe- and Ni-Based Alloys in Molten Li2BeF4 (FLiBe) Effect of Impurities on the Compatibility of Steels in Supercritical CO2 at 450°-650°C Tribocorrosion of stainless steel sliding against graphite in FLiNaK molten salt Internal carburization and scale formation on austenitic steels in supercritical carbon dioxide Evaluation of Coatings to Improve Steel Compatibility in Supercritical CO2 Assessing Compatibility of Natural Gas Pipeline Materials with Hydrogen, CO2, and Ammonia Performance of Structural Alloys in Bio-oil Production, Upgrading, and Storage Systems... Corrosion Compatibility of Stainless Steels and Nickel in Pyrolysis Biomass-Derived Oil at Elevated Storage Temperatures... Exploring Material Solutions for Supercritical CO2 Applications above 800 °C... Understanding FLiNaK salt intrusion behavior on nuclear grade graphite via neutron tomography New High-Strength Ni-based Alloys for High Temperature Service in Liquid Fluoride Salt Environments Effect of Carboxylic Acids on Corrosion of Type 410 Stainless Steel in Pyrolysis Bio-Oil Material Selection and Corrosion Studies of Candidate Bearing Materials for Use in Molten Chloride Salt... Compatibility of Fuel System Elastomers and Plastics with a Fast-Pyrolysis Oil (Bio-oil) at Room Temperature... Interaction of beryllium with 316H stainless steel in molten Li2BeF4 (FLiBe)... Compatibility of 316H in Static and Flowing FLiBe and FLiNaK Salts at 550°-650°C... Approach to using 3D laser-induced breakdown spectroscopy (LIBS) data to explore the interaction of FLiNaK and FLiBe molten s... Pagination Current page 1 Page 2 Page 3 … Next page ›› Last page Last » Key Links Curriculum Vitae ORCID Organizations Physical Sciences Directorate Materials Science and Technology Division