Nathan A Capps Contact cappsna@ornl.gov | 865.341.0458 All Publications Empirical and mechanistic transient fission gas release model for high-burnup LOCA conditions Multiphysics analysis of fuel Fragmentation, Relocation, and dispersal Susceptibility–Part 2: High-Burnup Steady-State operating and fuel performance conditions BISON validation to in situ cladding burst test and high-burnup LOCA experiments BISON analysis of FeCrAl and Zircaloy cladding deformation during simulated BWR cyclic dryout conditions Model for determining rupture area in Zircaloy cladding under LOCA conditions... Quantifying deformation during Zry-4 burst testing: a comparison of BISON and a combined in-situ digital image correlation and infrared thermography method Evaluation of the Effect of Burnup Acceleration on UO2 Microstructure Evolution Accident Tolerant and High Burnup Hotcell PIE at ORNL... In-situ thermomechanical measurements during burst testing of Zr claddings using digital image correlation and infrared therm... Advanced microscopy for characterization of high burnup commercial uo2 fuel before and after LOCA testing... BISON Validation to In-Situ Cladding Burst Test and High Burnup LOCA Experiments... Quantifying the relationship between temperature, pressure, and strain during Zry-4 burst testing... Assessment of the Effect of Prototypic High-Burnup Operating Conditions of Fuel Fragmentation, Relocation, and Dispersal Susceptibility Initial microstructure examination of high burnup fuel with varying operational histories... Accelerated characterization of Zircaloy-4 and ATF cladding creep behavior in accident relevant conditions Application of BISON to UO2 MiniFuel fission gas release analysis... BISON validation of FeCrAl cladding mechanical failure during simulated reactivity-initiated accident conditions... Chromium-coated cladding analysis under simulated LOCA burst conditions... Report Summarizing Progress in Digital Image Correlation Analysis of Burst Phenomenon... Characterization of modeling and experimental data inconsistencies from burst testing for high-burnup commercial fuel rod app... High-burnup fuel stress analysis prior to and during a LOCA transient... The U.S. Accident Tolerant Fuels Program — Update on a National Initiative... FUEL PERFORMANCE ANALYSIS OF CHROMIUM-COATED CLADDING UNDER BURST CONDITIONS... Engineering Assessment of UO2 and Cladding Behavior under High Burnup LOCA Conditions... Full core LOCA safety analysis for a PWR containing high burnup fuel... Pagination First page « First Previous page ‹‹ Page 1 Current page 2 Page 3 Next page ›› Last page Last » Organizations Fusion and Fission Energy and Science Directorate Nuclear Energy and Fuel Cycle Division Nuclear Fuel Development Section Advanced Fuel Fabrication and Instrumentation Group