![Sphere that has the top right fourth removed (exposed) Colors from left are orange, dark blue with orange dots, light blue with horizontal lines, then black. Inside the exposure is green and black with boxes.](/sites/default/files/styles/featured_square_large/public/2024-06/slicer.jpg?h=56311bf6&itok=bCZz09pJ)
Filter News
Area of Research
- (-) Materials (39)
- Advanced Manufacturing (13)
- Biology and Environment (13)
- Building Technologies (1)
- Clean Energy (62)
- Computational Engineering (1)
- Computer Science (6)
- Electricity and Smart Grid (2)
- Functional Materials for Energy (1)
- Fusion and Fission (15)
- Fusion Energy (7)
- Isotopes (3)
- Materials for Computing (6)
- National Security (4)
- Neutron Science (8)
- Nuclear Science and Technology (14)
- Nuclear Systems Modeling, Simulation and Validation (1)
- Quantum information Science (4)
- Sensors and Controls (1)
- Supercomputing (18)
News Type
News Topics
- (-) 3-D Printing/Advanced Manufacturing (12)
- (-) Critical Materials (6)
- (-) Fusion (4)
- (-) Grid (1)
- (-) Machine Learning (2)
- (-) Molten Salt (2)
- (-) Nanotechnology (17)
- (-) Nuclear Energy (5)
- (-) Quantum Science (2)
- (-) Space Exploration (1)
- Advanced Reactors (3)
- Artificial Intelligence (3)
- Bioenergy (5)
- Biology (2)
- Biomedical (2)
- Buildings (2)
- Chemical Sciences (11)
- Clean Water (1)
- Climate Change (3)
- Composites (5)
- Computer Science (5)
- Coronavirus (1)
- Cybersecurity (2)
- Decarbonization (2)
- Energy Storage (16)
- Environment (5)
- Frontier (2)
- High-Performance Computing (2)
- Irradiation (1)
- Isotopes (4)
- ITER (1)
- Materials (35)
- Materials Science (31)
- Microscopy (14)
- National Security (1)
- Neutron Science (8)
- Partnerships (2)
- Physics (7)
- Polymers (8)
- Quantum Computing (2)
- Simulation (1)
- Sustainable Energy (6)
- Transformational Challenge Reactor (1)
- Transportation (9)
Media Contacts
![CellSight allows for rapid mass spectrometry of individual cells. Credit: John Cahill, Oak Ridge National Laboratory/U.S. Dept of Energy](/sites/default/files/styles/list_page_thumbnail/public/2019-10/4CellSightPhoto_0.png?h=67debf3e&itok=fmsxiN_b)
Researchers at the Department of Energy’s Oak Ridge National Laboratory have received five 2019 R&D 100 Awards, increasing the lab’s total to 221 since the award’s inception in 1963.
![Tungsten tiles for fusion](/sites/default/files/styles/list_page_thumbnail/public/2019-07/EBM-tungsten_tiles_ORNL.png?h=0c890573&itok=XgIsl0tA)
Using additive manufacturing, scientists experimenting with tungsten at Oak Ridge National Laboratory hope to unlock new potential of the high-performance heat-transferring material used to protect components from the plasma inside a fusion reactor. Fusion requires hydrogen isotopes to reach millions of degrees.
![Desalination process](/sites/default/files/styles/list_page_thumbnail/public/2019-07/hydrophopicDesal04_0.jpg?h=5473d993&itok=bUBkpGOa)
A new method developed at Oak Ridge National Laboratory improves the energy efficiency of a desalination process known as solar-thermal evaporation.
![An ORNL-developed graphite foam, which could be used in plasma-facing components in fusion reactors, performed well during testing at the Wendlestein 7-X stellarator in Germany.](/sites/default/files/styles/list_page_thumbnail/public/2019-02/W7-XPlasmaExposure_0.jpg?h=d5d04e3b&itok=uKiauhdF)
Scientists have tested a novel heat-shielding graphite foam, originally created at Oak Ridge National Laboratory, at Germany’s Wendelstein 7-X stellarator with promising results for use in plasma-facing components of fusion reactors.
![At the salt–metal interface, thermodynamic forces drive chromium from the bulk of a nickel alloy, leaving a porous, weakened layer. Impurities in the salt drive further corrosion of the structural material. Credit: Stephen Raiman/Oak Ridge National Labora At the salt–metal interface, thermodynamic forces drive chromium from the bulk of a nickel alloy, leaving a porous, weakened layer. Impurities in the salt drive further corrosion of the structural material. Credit: Stephen Raiman/Oak Ridge National Labora](/sites/default/files/styles/list_page_thumbnail/public/story%20tip%20image%20BW%20only.jpg?itok=Vbc0iTLt)
Oak Ridge National Laboratory scientists analyzed more than 50 years of data showing puzzlingly inconsistent trends about corrosion of structural alloys in molten salts and found one factor mattered most—salt purity.
![B_Hudak_ORNL.jpg B_Hudak_ORNL.jpg](/sites/default/files/styles/list_page_thumbnail/public/B_Hudak_ORNL.jpg?itok=Os5uKm-q)
An Oak Ridge National Laboratory-led team used a scanning transmission electron microscope to selectively position single atoms below a crystal’s surface for the first time.
![An ORNL-led team used scanning transmission electron microscopy to observed atomic transformations on the edges of pores in a two-dimensional transition metal dichalcogenide. The controlled production of nanopores with stable atomic edge structures may en An ORNL-led team used scanning transmission electron microscopy to observed atomic transformations on the edges of pores in a two-dimensional transition metal dichalcogenide. The controlled production of nanopores with stable atomic edge structures may en](/sites/default/files/styles/list_page_thumbnail/public/news/images/03%20-%20MoWSe2%20StoryTip%20Fig_PRINT%20r1.jpg?itok=cT1gasG8)
An Oak Ridge National Laboratory–led team has learned how to engineer tiny pores embellished with distinct edge structures inside atomically-thin two-dimensional, or 2D, crystals. The 2D crystals are envisioned as stackable building blocks for ultrathin electronics and other advance...
![3D printed permanent magnets with increased density were made from an improved mixture of materials, which could lead to longer lasting, better performing magnets for electric motors, sensors and vehicle applications. Credit: Jason Richards/Oak Ridge Nati 3D printed permanent magnets with increased density were made from an improved mixture of materials, which could lead to longer lasting, better performing magnets for electric motors, sensors and vehicle applications. Credit: Jason Richards/Oak Ridge Nati](/sites/default/files/styles/list_page_thumbnail/public/news/images/06%20-%203D-printed_permament_magnet.jpg?itok=q28pGVEm)
Oak Ridge National Laboratory scientists have improved a mixture of materials used to 3D print permanent magnets with increased density, which could yield longer lasting, better performing magnets for electric motors, sensors and vehicle applications. Building on previous research, ...
![Illustration of satellite in front of glowing orange celestial body](/sites/default/files/styles/list_page_thumbnail/public/NASA_Parker_Solar_Probe_rendering.jpg?h=90c266c4&itok=KqHQKRNt)
A shield assembly that protects an instrument measuring ion and electron fluxes for a NASA mission to touch the Sun was tested in extreme experimental environments at Oak Ridge National Laboratory—and passed with flying colors. Components aboard Parker Solar Probe, which will endure th...