![White car (Porsche Taycan) with the hood popped is inside the building with an american flag on the wall.](/sites/default/files/styles/featured_square_large/public/2024-06/2024-P09317.jpg?h=8f9cfe54&itok=m6sQhZRq)
Filter News
Area of Research
- (-) Building Technologies (3)
- (-) Materials (90)
- Advanced Manufacturing (24)
- Biology and Environment (59)
- Clean Energy (170)
- Computational Engineering (2)
- Computer Science (10)
- Electricity and Smart Grid (3)
- Energy Frontier Research Centers (1)
- Energy Sciences (1)
- Fuel Cycle Science and Technology (1)
- Functional Materials for Energy (1)
- Fusion and Fission (30)
- Fusion Energy (11)
- Isotope Development and Production (1)
- Isotopes (3)
- Materials for Computing (15)
- Mathematics (1)
- National Security (27)
- Neutron Science (25)
- Nuclear Science and Technology (37)
- Nuclear Systems Modeling, Simulation and Validation (1)
- Quantum information Science (9)
- Sensors and Controls (1)
- Supercomputing (57)
News Topics
- (-) 3-D Printing/Advanced Manufacturing (24)
- (-) Clean Water (3)
- (-) Grid (5)
- (-) Machine Learning (5)
- (-) Nanotechnology (39)
- (-) Nuclear Energy (16)
- (-) Quantum Science (11)
- (-) Sustainable Energy (15)
- Advanced Reactors (4)
- Artificial Intelligence (9)
- Big Data (2)
- Bioenergy (11)
- Biology (4)
- Biomedical (7)
- Buildings (8)
- Chemical Sciences (32)
- Climate Change (5)
- Composites (9)
- Computer Science (18)
- Coronavirus (4)
- Critical Materials (13)
- Cybersecurity (4)
- Decarbonization (7)
- Energy Storage (34)
- Environment (15)
- Exascale Computing (2)
- Frontier (3)
- Fusion (7)
- High-Performance Computing (4)
- Irradiation (1)
- Isotopes (13)
- ITER (1)
- Materials (73)
- Materials Science (78)
- Mathematics (1)
- Microscopy (27)
- Molten Salt (3)
- National Security (3)
- Net Zero (1)
- Neutron Science (33)
- Partnerships (11)
- Physics (29)
- Polymers (17)
- Quantum Computing (3)
- Renewable Energy (1)
- Security (2)
- Simulation (1)
- Space Exploration (2)
- Summit (2)
- Transformational Challenge Reactor (3)
- Transportation (14)
Media Contacts
![Using as much as 50 percent lignin by weight, a new composite material created at ORNL is well suited for use in 3D printing. Using as much as 50 percent lignin by weight, a new composite material created at ORNL is well suited for use in 3D printing.](/sites/default/files/styles/list_page_thumbnail/public/2018-P09551.jpg?itok=q7Ri01Qb)
Scientists at the Department of Energy’s Oak Ridge National Laboratory have created a recipe for a renewable 3D printing feedstock that could spur a profitable new use for an intractable biorefinery byproduct: lignin.
![B_Hudak_ORNL.jpg B_Hudak_ORNL.jpg](/sites/default/files/styles/list_page_thumbnail/public/B_Hudak_ORNL.jpg?itok=Os5uKm-q)
An Oak Ridge National Laboratory-led team used a scanning transmission electron microscope to selectively position single atoms below a crystal’s surface for the first time.
![After a monolayer MXene is heated, functional groups are removed from both surfaces. Titanium and carbon atoms migrate from one area to both surfaces, creating a pore and forming new structures. Credit: ORNL, USDOE; image by Xiahan Sang and Andy Sproles. After a monolayer MXene is heated, functional groups are removed from both surfaces. Titanium and carbon atoms migrate from one area to both surfaces, creating a pore and forming new structures. Credit: ORNL, USDOE; image by Xiahan Sang and Andy Sproles.](/sites/default/files/styles/list_page_thumbnail/public/news/images/hTiC04_v2.jpg?itok=GeDQD6xS)
Scientists at the Department of Energy’s Oak Ridge National Laboratory induced a two-dimensional material to cannibalize itself for atomic “building blocks” from which stable structures formed. The findings, reported in Nature Communications, provide insights that ...
![Sergei Kalinin, director of the Institute for Functional Imaging of Materials at Oak Ridge National Laboratory, convenes experts in microscopy and computing to gain scientific insights that will inform design of advanced materials for energy and informati Sergei Kalinin, director of the Institute for Functional Imaging of Materials at Oak Ridge National Laboratory, convenes experts in microscopy and computing to gain scientific insights that will inform design of advanced materials for energy and informati](/sites/default/files/styles/list_page_thumbnail/public/news/images/2018-P00854%20%28002%29.jpg?itok=UfhMWf3G)
Sergei Kalinin of the Department of Energy’s Oak Ridge National Laboratory knows that seeing something is not the same as understanding it. As director of ORNL’s Institute for Functional Imaging of Materials, he convenes experts in microscopy and computing to gain scientific insigh...
![Schematic drawing of the boron nitride cell. Credit: University of Illinois at Chicago. Schematic drawing of the boron nitride cell. Credit: University of Illinois at Chicago.](/sites/default/files/styles/list_page_thumbnail/public/news/images/schematic1.jpg?itok=iYCttAg3)
A new microscopy technique developed at the University of Illinois at Chicago allows researchers to visualize liquids at the nanoscale level — about 10 times more resolution than with traditional transmission electron microscopy — for the first time. By trapping minute amounts of...
![Researchers 3D printed molds for precasting concrete using the Big Area Additive Manufacturing, or BAAM™, system at DOE’s Manufacturing Demonstration Facility at ORNL. Complex, durable mold designs can be produced in less time than traditional wood or fib Researchers 3D printed molds for precasting concrete using the Big Area Additive Manufacturing, or BAAM™, system at DOE’s Manufacturing Demonstration Facility at ORNL. Complex, durable mold designs can be produced in less time than traditional wood or fib](/sites/default/files/styles/list_page_thumbnail/public/news/images/02%20-%203D-printed_precast_concrete_molds.gif?itok=nni1l9l2)
The construction industry may soon benefit from 3D printed molds to make concrete facades, promising lower cost and production time. Researchers at Oak Ridge National Laboratory are evaluating the performance of 3D printed molds used to precast concrete facades in a 42-story buildin...
![An ORNL-led team used scanning transmission electron microscopy to observed atomic transformations on the edges of pores in a two-dimensional transition metal dichalcogenide. The controlled production of nanopores with stable atomic edge structures may en An ORNL-led team used scanning transmission electron microscopy to observed atomic transformations on the edges of pores in a two-dimensional transition metal dichalcogenide. The controlled production of nanopores with stable atomic edge structures may en](/sites/default/files/styles/list_page_thumbnail/public/news/images/03%20-%20MoWSe2%20StoryTip%20Fig_PRINT%20r1.jpg?itok=cT1gasG8)
An Oak Ridge National Laboratory–led team has learned how to engineer tiny pores embellished with distinct edge structures inside atomically-thin two-dimensional, or 2D, crystals. The 2D crystals are envisioned as stackable building blocks for ultrathin electronics and other advance...
![3D printed permanent magnets with increased density were made from an improved mixture of materials, which could lead to longer lasting, better performing magnets for electric motors, sensors and vehicle applications. Credit: Jason Richards/Oak Ridge Nati 3D printed permanent magnets with increased density were made from an improved mixture of materials, which could lead to longer lasting, better performing magnets for electric motors, sensors and vehicle applications. Credit: Jason Richards/Oak Ridge Nati](/sites/default/files/styles/list_page_thumbnail/public/news/images/06%20-%203D-printed_permament_magnet.jpg?itok=q28pGVEm)
Oak Ridge National Laboratory scientists have improved a mixture of materials used to 3D print permanent magnets with increased density, which could yield longer lasting, better performing magnets for electric motors, sensors and vehicle applications. Building on previous research, ...
![Rose Ruther and Jagjit Nanda have been collaborating to develop a membrane for a low-cost redox flow battery for grid-scale energy storage. Rose Ruther and Jagjit Nanda have been collaborating to develop a membrane for a low-cost redox flow battery for grid-scale energy storage.](/sites/default/files/styles/list_page_thumbnail/public/MembraneRoseJagjitFilterSmile.jpg?itok=p8-Q46wn)
Oak Ridge National Laboratory scientists have developed a crucial component for a new kind of low-cost stationary battery system utilizing common materials and designed for grid-scale electricity storage. Large, economical electricity storage systems can benefit the nation’s grid ...
![The electromagnetic isotope separator system operates by vaporizing an element such as ruthenium into the gas phase, converting the molecules into an ion beam, and then channeling the beam through magnets to separate out the different isotopes. The electromagnetic isotope separator system operates by vaporizing an element such as ruthenium into the gas phase, converting the molecules into an ion beam, and then channeling the beam through magnets to separate out the different isotopes.](/sites/default/files/styles/list_page_thumbnail/public/6_1_17%20Ru_NF3_530uA%5B2%5D.jpg?itok=3OLnNZqa)
A tiny vial of gray powder produced at the Department of Energy’s Oak Ridge National Laboratory is the backbone of a new experiment to study the intense magnetic fields created in nuclear collisions.