61 - 70 of 264 Results
The technology described reduces the porosity from the printed parts in the material feeding line and improve mechanical properties.
Complex protective casings and housings are necessary for many applications, including combustion chambers of gas turbines used in aerospace engines. Manufacturing these components from forging and/or casting as a whole is challenging, costly, and time-consuming.
This technology creates a light and metalless current collector for battery application. Cathodes coated on this new current collector demonstrated similar contact resistance, lower charge transfer resistance and similar or high rate performance.
Additively manufacturing of the windings with a conductor distributed in the cross-section according to the Hilbert curve provides many benefits as it allows for the reduction of the high-frequency losses due to the reduction of the effective winding conductor size.
Algorithm for increasing the throughput on a variety of configurations of multi-laser additive systems through intelligent assignment of work to the individual lasers.
Liners in Type-IV hydrogen storage tanks often fail due to hydrogen saturation, additional weight and design limitations due to expensive tooling for conventional molding technique.
In manufacturing parts for industry using traditional molds and dies, about 70 percent to 80 percent of the time it takes to create a part is a result of a relatively slow cooling process.
Unlike conventional overmolding process, overmolding onto an AM part can result in highly optimized structures without significant increase in manufacturing cost.